2.
Remove the battery connector from the plate cover ➀ and disconnect the connector. ➁
Battery connector
Plate cover
3.
Turn the 2 screws that fix the plate cover counterclockwise to remove them. ➀
Pull the plate cover towards you ➁ and lift it up to remove it. ➂
4.
Hold the pullout label at the bottom of the battery pack and remove the battery pack.
Do not hold the connector or cable of the battery pack.
If you see red tape stuck on the top of the battery pack, you can remove the battery completely by pulling
it 10 cm further. Hold the battery securely with your both hands not to drop it.
Remove the 2 screws.
Battery connector
Battery pack
Pullout label
(Pull this to remove.)
31
6. Maintenance and inspection
Disconnect by holding here.