Connection Panel - Beoplay V1-32 - Bang & Olufsen BeoPlay V1–32 Manual

8
~ – Mains supply
Connection to the
mains supply external aerial/cable TV network
ANTENNA
WLAN
ANTENNA WLAN
For connection of wireless
network antenna (optional)
Important
Mains cord and plug Connect the ~ socket on the connection panel of your TV to the wall outlet.
The TV is in standby mode and ready to be used.
The supplied plug and mains cord are specially designed for the product. Do
not change the plug and if the mains cord is damaged, you must buy a
Bang & Olufsen approved mains cord.
Connection panel – BeoPlay V1–32
Any equipment you connect to the connection panel must be registered in the
SOURCE LIST SETUP menu.
AERIAL (5V – 50mA)
Aerial input socket for an
or for an analogue signal
5V 50mA
SATELLITE AERIAL
SATELLITE (14/18V – 0.4A)
Aerial input socket for a digital satellite signal.
Depending on your tuner options, you may have
either one or no satellite socket. Never connect an
optional active antenna here
2 x COMMON INTERFACE (CA Module)
For insertion of a CA module and smart card
for access to coded digital channels. For more
information about compatible smart card and
CA module combinations, contact your
retailer. See the online guide for information
on correct insertion*
2
CHIPSIDE
CHIPSIDE
COMMON INTERFACE
For connection to the Internet.
UPnP streaming of digital photos,
1 *Make sure the cable connection between the
product and the router does not exit the building
to avoid contact with high voltage.
USB ( , 5V – 0.5A)
For connection of a
USB device to browse
digital photos, video or
music files
Ethernet ( )*
1
For software updates or for
video or music files from, for
example, a NAS device