The Pincode System - Bang & Olufsen BeoVision MX 4200 User Manual

20
You choose whether or not to
activate the pincode system. The
pincode system is deactivated when
you delete your pincode.
The pincode system is intended to
make normal use of your television
impossible for someone who does
not know the pincode.
When the television has been
disconnected from the mains for
15–30 minutes, the pincode system
goes into effect.
When reconnected and switched on,
the television automatically switches
itself off after five minutes. Entering
the pincode returns the television to
normal.
Should you lose or forget your code,
contact your Bang & Olufsen retailer
to receive a mastercode which
disables your pincode.
NOTE! You can change your pincode up to five
times within a three-hour period.

The pincode system

Activate the pincode system
Bring up the TV SETUP menu on the screen,
activate the PINCODE menu and choose from
the submenus.
TV SETUP
PROGRAM GROUPS
TUNING
PINCODE
TIMER RECORDING
CONFIRM PINCODE
PLAY TIMER
OPTIONS
STAND POSITIONS
GROUP1
. . .
. . .
back select GO
TV SETUP
PROGRAM GROUPS
TUNING
DELETE PINCODE
TIMER RECORDING
NEW PINCODE
PLAY TIMER
OPTIONS
STAND POSITIONS
GROUP1
. . .
. . .
back select
GO
To activate the pincode system...
> Press MENU to bring up the TV SETUP menu.
ss
> Press twice, followed by STOP. The PINCODE
PINCODE
menu appears on the screen.
0 . . .
> Use the number buttons or
. . . .
enter the four digits of your code. Press
back to digits you wish to correct and use
to change them.
> Press GO after the last digit is found.
> Re-enter your code to confirm it and press GO
next
again. If the two codes are not identical, the
accept
GO
input fields are cleared and you must enter the
code again.
To change or delete your pincode...
> Press MENU to bring up the TV SETUP menu.
ss
> Press twice, followed by STOP. The PINCODE
PINCODE
menu appears on the screen.
> Enter the correct pincode to be able to change
or delete pincode functions.
> To change your code, enter the code digits using
the number buttons or
Re-enter the code to confirm it.
> To delete your code, choose DELETE PINCODE
and press GO.
select
GO
To cancel a code entry...
> Press STOP. The entry is cancelled and the input
fields are cleared.
on Beo4 to
ss
to go
or
and press GO.