Timer Sound; Switching Timer Sound To On Or Off - Bang & Olufsen BeoVision MX 4002 User Manual

Switching Timer sound to on or off...

If your MX 4002 is a part of a BeoLink
system, you can choose to include your
MX 4002 in a Timer play programming,
made on your main room system. On
MX 4002, you get sound only.
To do so, call up the Timer menu –
choosing On means that the TV
speakers will be cut in when the Timer
Play programming is being executed.
Choosing Off means not cutting them
in.
*Note: Please contact your Bang & Olufsen dealer
for further information about BeoLink systems.
T I M E R S O U N D
Menu
• TV program list
• Sound
• Picture
• Setup
The main menu
Setup
• Tuning
• Timer
• Clock
• Sockets
• Stand
The Setup menu

Timer sound

Off
The Timer menu – the Off or On options decide
whether sound is to be distributed to the TV
speakers from a Timer play that you have made
on your main room system.
Press to call up the main menu
The main menu appears...
Press until Setup is lit up
Press to call up the Setup menu
The Setup menu appears...
Press until Timer is lit up
Press to call up the Timer menu
The Timer menu appears...
Press to set to On or Off
Press GO to store it
Press to remove the menus
15
MENU
then
GO
then
GO
or
then
GO
EXIT