Table of Contents
Advertisement
(c) 7.2.3 VAP Configuration
This section provides configuration of each Virtual Access Point with settings such as Profile Name,
ESSID, and VLAN ID.
To enable each VAP, the administrator must configure each VAP manually. The settings of each VAP are
collected as its profile.
• VAP: Enable or Disable this VAP.
• Profile Name: The profile name of each VAP for identity / management purposes.
• ESSID: ESSID (Extended Service Set ID) is the unique SSID used by a client device to associate with the
specified VAP. ESSID determines the service level assigned to a client.
• VLAN ID: EAP-300 supports tagged VLANs (virtual LANs). To enable VLAN function, each VAP must
have a unique VLAN ID; valid values range from 1 to 4094.
VAP Configuration Page
47
Advertisement
Table of Contents
