LevelOne EAP-300 User Manual page 7

LED Panel
1 LED ON indicates power on; OFF indicates power off.
2 LED OFF indicates RF is not ready; ON indicates RF is ready; CLINKING indicates
transmitting/receiving data.
3 LED ON indicates Ethernet cable connected; OFF indicates no connection.
4 For future use.
5 To indicate different WES status as follows.
WES Negotiate Timeout
EAP-300 LED Panel
WES Start
WES Negotiate
WES Success
WES Fail
Master
LED (Green) OFF and then
BLINKING SLOWLY
BLINKING NORMALLY
(Green)
LED (Green) ON
LED (Red) ON
LED (Green) ON
7
Slave
LED (Red) OFF and then
BLINKING SLOWLY
BLINKING NORMALLY
(Red)
LED (Red) ON
LED (Green) ON
LED (Red) ON