LevelOne EAP-300 User Manual page 29

Step 3: Configuring MAC ACL (Access Control List)
Click on the hyperlink corresponding with your VAP in the MAC ACL column. You will be brought to the
Access Control Settings page.
Please choose among Disable, Allow, Deny, and RADIUS ACL from the drop-down menu of Access
Control Type.
1) Disable Access Control: This means that there is no restriction for client devices to access the
system.
2) MAC ACL Allow List: This means that only the client devices (identified by their MAC addresses)
listed in the Allow List ("allowed MAC addresses") are granted with access to the system. The
administrator can temporarily block any allowed MAC address by checking Disable, until the
administrator re-Enables the listed MAC.
An empty Allow List means that there are no allowed MAC addresses. Make sure at least the MAC of
the modifying system is included (e.g. network administrator's computer)
Access Control Settings Page
MAC ACL Allow List
29