Samsung SF-430 User Manual page 166

Display
LOAD DOCUMENT You have attempted to
set up a sending
operation with no
document loaded.
MEMORY FULL The memory is full.
MEMORY JOB You attempted to add
NOT ASSIGNED documents when there is
no scheduled job.
NO ANSWER The remote machine has
not answered after all
the redial attempts.
NO. NOT The one-touch or speed
ASSIGNED dial location you tried to
use has no number
assigned to it.
PC NOT Your product is not
AVAILABLE properly connected to
your PC.
POLLING ERROR The remote fax machine
you want to poll is not
ready to respond to your
poll.
Or
When setting up to poll
another fax machine,
you have used an
incorrect poll code.
Meaning
Load a document and try
again.
Either delete unnecessary
documents, or retransmit
after more memory becomes
available, or split the
transmission into more than
one operation.
Check the display if there is
any scheduled job. The
display should indicate the
job in Standby mode (for
example, DELAY TX or SAVE
TOLL).
Try again. Make sure the
remote machine is
operational.
Dial the number manually
with the keypad, or assign a
number.
Check the cable connection
between the product and the
PC. Connect properly using a
parallel or USB cable. See
page 1.10.
The remote operator should
know in advance that you are
polling and have their fax unit
loaded with the original
document.
Or
Enter the correct poll code.
Solution
7.7
T
ROUBLESHOOTING
7