information from applications and user settings to put the system as a whole into a
low-power state.
Wake-up Devices and Events
Table 9 lists the devices or specific events that can wake the computer from specific
states.
Table 9: Wake-up Devices and Events
These devices/events can wake up the computer...
LAN
Modem (Back panel Serial Port A)
PME# signal
Power switch
PS/2 devices
RTC alarm
USB
Note:
The use of these wake-up events from an ACPI state requires an
operating system that provides full ACPI support. In addition, software,
drivers, and peripherals must fully support ACPI wake events.
Viglen BX130 – VIG385P User Manual
...from this state
S1, S3, S4, S5
S1, S3
S1, S3, S4, S5
S1, S3, S4, S5
S1, S3
S1, S3, S4, S5
S1, S3
77