Viglen BX130 User Manual page 49

Boot Options
In the Setup program, the user can choose to boot from a floppy drive, hard drive,
CD-ROM, or the network. The default setting is for the floppy drive to be the primary
boot device and the hard drive to be the secondary boot device. By default the third
and fourth devices are disabled.
Booting from CD-ROM is supported in compliance to the El Torito bootable CD-ROM
format specification. Under the Boot menu in the Setup program, CD-ROM is listed
as a boot device. Boot devices are defined in priority order. If the CD-ROM is
selected as the boot device, it must be the first device.
The network can be selected as a boot device. This selection allows booting from a
network add-in card with a remote boot ROM installed
.
BIOS Setup Access
Access to the Setup program can be restricted using passwords. User and
supervisor passwords can be set using the Security menu in Setup. The default is
no passwords enabled.
BIOS Recovery
Some types of failure can destroy the BIOS. For example, the data can be lost if a
power outage occurs while the BIOS is being updated in flash memory. The BIOS
recovery function allows you to recover your bios image file if the bios flashing
procedure fails.
48
Viglen BX130 – VIG385P User Manual