Viglen BX130 User Manual page 33

The battery can be found using Figure 12. I t is located on the bottom left hand side
of the Motherboard. To replace the battery, carry out the following:
1. Before commencing any work inside your Viglen system please read the warnings
and cautions at the beginning of this Chapter.
2. Turn off all peripheral devices connected to the system.
3. Turn off the system.
4. Find the battery location on the Motherboard.
5. Remove any components that are blocking access to the battery.
6. Gently pry the battery free from its socket, taking care to note the "+" and "-"
orientation of the battery.
7. Install the new battery in the socket.
8. GENTLY push a flathead screwdriver as shown in Figure 12.
9. Then pry the battery out of the socket.
Figure 12: Replacing the CMOS Battery
Viglen BX130 – VIG385P User Manual
32