Viglen BX130 User Manual page 56

USB Controller
This setting allows you to enable or disable the USB Controller. The options are
Enabled, and Disabled.
USB 2.0 Controller
This setting allows you to enable or disable USB 2.0 (EHCI) Controller. The options
are Enabled, and Disabled.
USB Legacy Support
This setting allows you to enable or disable the functions of USB, Keyboard/Mouse
under POST and DOS. The options are "Disabled", and "Enabled."
USB KB Wake-Up From S3
This setting allows you to enable or disable the function of USB KB Wake-Up from
S3. The options are "Disabled", and "Enabled."
AC97 Audio
Select "Disable" to disable AC 97 Controller. Select "Auto" to allow the BIOS select
AC97 automatically. The options are "Auto", and "Disabled."
CPU THRM-Throttling
THRM throttling is used to lower power consumption and reduce the heat generated
by the CPU. The options for this setting are "87.5%", "75%".
I/O Device Configuration
Onboard Serial Port1/Onboard Serial Port2
This setting allows the user to set the address and the corresponding IRQ for the
Serial Port1 and Serial Port 2. The options are "Disabled", "3F8/IRQ4", "2F8/IRQ3",
"3E8/IRQ4", "2E8/IRQ3", and "Auto". The default setting for Serial Port1 is
"3F8/IRQ4" and the default for Port 2 is "2F8/IRQ3".
UART Mode Select
This setting allows the user to select the UART mode for the BIOS. The options are
"IrDA", "ASKIR" and "Normal."
RxD, TxD Active
This allows the user to change the settings for the "RxD, TxD Active" function. The
options are "Hi, Hi", "Hi, Lo", "Lo, Hi", and "Lo, Lo".
IR Transmission Delay
If "Enabled", the transmission of IR (infrared) signals will be delayed. The options are
"Enabled" and "Disabled".
UR2 Duplex Mode
This setting set the mode for the UR2 Duplex Mode. The options are "Full" and
"Half".
55
Viglen BX130 – VIG385P User Manual