Viglen BX130 User Manual page 58

This setting allows the user to decide which method to use to power on the system.
The options are "Password", "Hot Key", "Mouse Left", "Mouse Right", "Any Key", and
"Button Only".
KB Power On Password
This setting allows the user to enter the Password when the system is powered on
via keyboard.
Hot Key Power On
This setting allows the user to decide which hot-keys to use in order to power on the
system. The options are "Ctrl-F1", "Ctrl-F2, Ctrl-F3", "Ctrl-F4", "Ctrl-F5", "Ctrl-F6",
"Ctrl-F7", and "Ctrl-F8".
PnP Configuration
Choose PCI/PnP Configurations from the Award BIOS main menu with the Left/Right
arrow keys. You should see the following display:
Initial Display From
This feature sets the device that will initiate the monitor display when the system is
first turned on. The Options are "PCI Slot" and "Onboard/AGP".
Resources Controlled By
This setting allows BIOS to automatically configure all boot and Plug and Play
compatible devices. If you choose Auto, you cannot select the IRQ, DMA and
memory base address fields, because BIOS automatically assigns them. The options
are "Auto <ESCD>" and "Manual".
Reset Configuration Data
Enabling this setting resets the extended system configuration data when you exit
setup. Do this when you have installed a new add-on and the system reconfiguration
has caused such a serious conflict that the OS cannot reboot the system. The
options are "Enabled" and "Disabled".
Hardware Monitors
CPU Warning Temperature
This allows you to set the CPU warning temperature. If the CPU temperature
reaches this threshold, an alarm will activate and a warning message will be
displayed onscreen. The options are "Disabled", "600C/1400F", "650C/1490F",
"700C/1580F", "750C/1670F", "800C/1760F" and "850C/1850F".
Processor & Clock Options
Hyper-Threading
57
Viglen BX130 – VIG385P User Manual