Viglen BX130 User Manual page 69

Chassis Intrusion
A Chassis Intrusion header is located at JL1. Attach the appropriate cable to inform
you of a chassis intrusion.
Universal Serial Bus (USB0/1)
Two USB 2.0 ports are located beside the PS/2 ports. USB0 is the bottom connector
and USB1 is the top connector. See the table below for pin definitions.
Front Panel Universal Serial Bus Headers
Extra USB headers (FPUSB0/FPUSB1/FPUSB2/FPUSB3) can be used for front side
USB access. You will need a USB cable to use eithe r connection. Refer to the table
below for pin definitions.
68
Viglen BX130 – VIG385P User Manual