Network Configuration; Basic Configuration - Eneo FNR-4016/500 User Manual

Select the exception type and handle method.
Select
interface.

9.5 Network Configuration

9.5.1 Basic Configuration
Select
Configure the network according to the actual situation. If
there is DHCP server in the network, enable "Obtain Auto"
and reboot the device to get the IP address under this network
segment automatically.
Select "Advance" to enter advanced configuration. You can
configure preferred DNS server1 and spare DNS server2, IP
address of alarm host and IP server.
Parameters
DNS1 DNS2
Alarm host
IP sever
to enter configuration
Description
Preferred and spare DNS server
Alarm signal can be uploaded to the IP address automatically
IP address of IP server
47