The parameters should be:
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Press "Apply" and "OK" after the setup. Press "Enter" under Hyper Terminal interface. When "[root@dvrdvs/]#"
appears, the connection is established.
Figure 2.1.4
Step 5: Disconnect and save connection.
According to the tips, disconnect and save "HK" for the next time. After saving, there will be a new "Hyper Terminal"
item established in the program group "Start"-> "Accessories"->"Communications"->"Hyper Terminal". "Connection"
names of all Hyper Terminal are included. You can see an icon named as "HK" here.
10