Eneo FNR-4016/500 User Manual page 35

First, select a Channel No. then click
Figure 9.4
Select one camera in the list and click
Then you can change IP address, sub mask or user name, password in the menu on the right, and click "Modify" to
confirm.
IP camera
Manually Add
First select a Channel No. to enable IP camera Config menu shown on the right.
Input the IP address, port, user name and password, click "Modify" to finish adding an IP
camera that will be listed in the IP Camera Information area.
Clicking Reset button will restore the configurations of IPC back to the previous ones.
Clicking button will delete the selected IP camera.
and the on-line IP cameras will be listed as figure below shown:
to finish.
34