Password Setting; Save & Exit Setup - Advantech PCA-6186 User Manual

3.10 Password Setting

To change the password:
1. Choose the "Set Password" option from the "Initial Setup Screen"
menu and press <Enter>.
The screen will display the following message:
Press <Enter>.
2. If the CMOS is good or if this option has been used to change the
default password, the user is asked for the password stored in the CMOS.
The screen will display the following message:
Enter the current password and press <Enter>.
3. After pressing <Enter> (ROM password) or the current password
(user-defined), you can change the password stored in the CMOS. The
password must be no longer than eight (8) characters.
Remember, to enable the password setting feature, you must first select
either "Setup" or "System" from the "Advanced BIOS Features" menu.
3.11 Save & Exit Setup
If you select this and press <Enter>, the values entered in the setup utili-
ties will be recorded in the CMOS memory of the chipset. The micropro-
cessor will check this every time you turn your system on and compare
this to what it finds as it checks the system. This record is required for the
system to operate.
Please Enter Your Password
Please Confirm Your Password
43 Chapter 3