Sample Calculation: Dimm Memory Capacity; Ddr Memory Speed Combinations; Table 1.7:Ddr Memory Speed Combinations; Memory Installation Procedures - Advantech PCA-6186 User Manual

1.8.1 Sample calculation: DIMM memory capacity

Suppose you install a 512 MB DIMM into your PCA-6186's socket 1 and
a 512 MB DIMM into sockets 2. Your total system memory is 1 GB, cal-
culated as follows:
Table 1.6:
Socket number
1
2
Total memory

1.9 DDR memory speed combinations

The following table provides information on the 400/533MHz front side
bus speed and the DDR200/266/333 memory speed combinations that
can be used with the 82845GV. This is the B1-stepping 82845GV.
Table 1.7: DDR memory speed combinations
FSB400
FSB533
Note :
Reference the "Intel 845G/845GL/845GV Chipset Specification
Update", document number 29865-706, for the following changes :
(1) The 82845GV adds unregistered and non-ECC DDR333 capability
(2) The use of unregistered and non-ECC DDR333 is limited to those
82845GV platforms that have a 533MHz front side bus speed.
DDR333 memory capability cannot be used in 82845GV platform that
have a 400MHz front side bus speed.

1.10 Memory Installation Procedures

To install DIMMs, first make sure the two handles of the DIMM socket
are in the "open" position. i.e. The handles lean outward. Slowly slide the
DIMM module along the plastic guides on both ends of the socket. Then
press the DIMM module right down into the socket, until you hear a
click. This is when the two handles have automatically locked the
DIMM mem capacity sample calculation
184-pin DIMM memory
512 MB x 1
512 MB x 1
1 GB]
DDR200
NO
NO
DDR266
YES
YES
13
Total
Memory
512 MB
512 MB
DDR333
NO
YES