Cleaning The Platen Roller And Printhead - Avery Dennison FRESHMARX 9415 Operator's Handbook Manual

C l e a n i n g t h e P l a t e n R o l l e r a n d P r i n t h e a d
Clean the platen roller and printhead after every five
rolls of labels or when you see voids in the print.
Voids
Remove any loaded labels.
1.
Use a plastic knife to snap off the supply slot
2.
cover.
Use the plastic knife to press the L-shaped bar and
3.
the platen roller pops out.
Note: Art is cut-away to show detail.
Correct Print
Supply Co ver
Care & Maintenance 3-3