Powerspan Register Initialization Through The I²C Serial Eeprom - Interphase 4538 Hardware Reference Manual

PowerSpan Initialization
• PWRUP_BOOT=0:
• PWRUP_DEBUG_EN=0:Disable debug mode
• PWRUP_BYPASS_EN=0:Disable PLL bypass
PowerSpan Register Initialization Through the I²C Serial EEPROM
Table 2-1
EEPROM. Refer to PowerSpan documentation, section EEPROM Loading for detailed
mapping between EEPROM addresses and PowerSpan registers.
.
Table 2-1. PowerSpan Register Initialization Values in the Serial EEPROM
EEPROM Initialization
Address
60
provides the PowerSpan Register initialization values stored in the Serial
Value
The PowerQUICC II boots locally (not through PCI)
Description
Interphase Corporation