Table of Contents
Advertisement
Connector Summary
Carrier Card Specification
CompactPCI Carrier Card
Interphase has defined a combination of cards to allow 4538 rear access configurations in
CompactPCI chassis. The combination comprises a 4538 "rear access", a CPCI carrier card
and an Interphase 6435 Rear Transition Module. The CPCI carrier card must be a Motorola
CPV8540 or Motorola MCPN750 or a CPCI card conforming to the routing requirements
described in
connector compatibility.
N
OTES
The Motorola cards will not allow the "Switched Mode" capability.
Contact Interphase for additional information on Switched Mode compatibility
Interconnections between CPCI J14 (PMC P4) and J3 are described in
Interconnections between CPCI J24 (PMC P4) and J5 are described in
ROW A
4538 Hardware Reference Manual
Figure 5-5. 4538 Connectors
Connector
Table 5-8
and
Table
5-9. See also
Table 5-8. CompactPCI J3 Pin-Out
ROW B
ROW C
Chapter 5: Connectors and Front Panel
Usage
PMC Connector P4 on page 103
ROW D
ROW E
for P4
Table
5-8.
Table
5-9.
107
Advertisement
Table of Contents
