Citizen OPTICAL MOUSE User Manual page 32

2
Printer Operation
Mode Settings
Menu Setting Table
Page Setup Menu - allows you to change settings related to the media or print quality.
System Setup Menu - allows you to change settings for the printer hardware and basic control systems.
After Print Menu - changes how the printer reacts after the label has been printed.
Interfaces - changes interface parameters such as baud rate.
Menu Setting
Top Menu
Page Setup
System Setup
After Print
Sub Menu Default
Print Speed 4 IPS
Print Darkness 10
Darkness adjust 0
Continuous Media 4.00 IN
Length 101.6mm
Vertical Position 0.00 IN
0.0mm
Horizontal Shift 0.00 IN
0.0mm
Media Sensor See Through
Small Media OFF
Adjustment
Small Media 1.00 IN
Length 25.4mm
Sensor Level 1.5V
Buzzer Select ON
Metric/Inch Inch
Max Media Length 10.00 IN
254.0mm
Settings Lock Off
Keyboard Lock Off
Control Code STD
Emulation Select DM4
AutoConfigure On
Menu Remarks
2 to 4 IPS Printing speed setting
00 to 30 Print darkness setting (printhead temperature)
-10 to 10 Darkness command adjustment
0.25 to 32.00 IN Setting default length of continuous
media, if selected. ; the lower line is in
6.40 to 812.8mm
metric mode.
-1.00 to 1.00 IN Print start position adjustment
-25.4 to 25.4mm
-1.00 to 1.00 IN Horizontal printing location adjustment
-25.4 to 25.4mm
See Through Label sensor selection
Reflect
None
ON Setting for small labels
OFF
0.25 to 1.00 IN Setting length of small label media
6.40 to 25.4mm
0.0V to 3.3V Setting the threshold of the sensor
ON Setting buzzer sounding conditions
OFF
Inch Setting the units used
mm
1.00 to 50.00 IN Setting the maximum label length
25.4 to 1270.0mm
On/Off When on, prevents software commands from
changing the values set by the VuePrint menu
On/Off Prevents the control panel from affecting the
printer's conrfiguration. (User "lock-out")
STD/ALT Selects between the Standard STX control
code or the "Alternative" code. Sometimes
called "AS400 mode".
DMI Datamax compatibility selection
DM4 DMI DataMax IClass
DPP DM4 DataMax 400 like
DPP DataMax Prodigy Plus
On Optional auto configure
Off On ...... Auto configure effective.
32
If a peeler unit or auto-cutter is
installed, each mode is automatically
set regardless of the "function select"
setting.