Chapter 1 Setup; Confirmation Of Carton Contents - Citizen OPTICAL MOUSE User Manual

1
Setup

Confirmation of Carton Contents

Removing the Packing Material
The printer is shipped with adhesive tape in place to hold the top cover
closed. Simply remove the two pieces of tape on either side of the top cover.
Then simply open the cover by lifting up and tipping it backwards.
There is another strip of adhesive tape that must be removed which holds
the mechanism closed for shipping. Remove the tape and attached paper by
carefully peeling from the plastic case.
Retain the tape should you need to transport the printer again. A further
piece of packing paper is inside the mechanism and you can remove this
when the head is opened as explained below.
Note: The empty carton and packing materials should be stored for future
shipping of the printer.
10
Check that the following accessories are
included with the printer in the carton.
Media holder Media holder
guide bar
Test label media
CD-ROM
(User's Manual) Quick-start Guide
Printer
Head cleaner
Power cord