Programming Brew Temperature - Keurig K-CUPK70 Owner's Manual

P12 201309003 KER755_K70-75.pdf 1C( K) ZB2319 2013.09.06
Controls & Indicators (LCD Control Center)
SECTION 2
simply press the Power Switch and you can
15
fig.
brew as soon as the water is heated and the
"READY TO BREW" indicator is displayed on
the LCD Control Center.
Off Time functions operate independently from
one another. To cancel either function, follow the
steps above and use the "H" and "M" buttons to
advance to 12:00 AM. When you reach 12:00 AM,
the LCD Control Center will indicate "OFF" and
the function will be disabled (fig. 15).
NOTE: The Auto Off timer and the On/Off Time
programming options operate independently,
but can also be programmed to work together.
For example, you can set the On Time function to
turn on at 7:00 AM and then set the Auto Off timer
function to turn off the brewer two hours after
the last brew.
Programming Brew Temperature (187° – 192º F)
The brewer is preset to brew at a temperature of 192°. You can adjust this
temperature down by 5 degrees if you prefer a cooler cup of coffee, tea
or hot cocoa. Simply follow the instructions below.
NOTE : The On Time and
12
Press the MENU Button five times to program
1.
16
fig.
the Brew Temperature feature.
The LCD Control Center will now display the
2.
programming options with a small arrow next
to "SET BREW TEMP" (fig. 16). Also, the
temperature 192° (initial setting) will be
displayed at the top of the LCD Control Center
to indicate the current temperature setting.
A minus sign will appear over the Left Button
3 .
and/or a plus sign over the Right Button. Use
these Buttons to raise or lower the temperature
one degree at a time.
Once you have reached your desired brew
4.
temperature, press the MENU Button twice to
exit the programming mode. "BREW TEMP SET"
will be indicated in the LCD Control Center if you
have changed it from 192°.