Purging The Brewer; Brewing Hot Water - Keurig K-CUPK70 Owner's Manual

P9 201309003 KER755_K70-75.pdf 1C( K) ZB2319 2013.09.06
The Water Reservoir can be filled in two ways.
Open the Easy-Fill Lid and pour water directly into the Water Reservoir
1.
while it is still attached to the brewer. Fill with water to and not beyond
the MAX FILL line. Close the lid. The entire Water Reservoir Lid may be
removed completely, if preferred.
Remove the Water Reservoir from brewer by first removing Lid from the
2.
Water Reservoir, then lifting the Water Reservoir straight up and toward
front of brewer. Fill with water to and not beyond the MAX FILL line.
Place the Water Reservoir back on the brewer and replace the Lid.
IMPORTANT: Do not remove the Water Reservoir during the brewing process.
Brewing Iced Beverages
Your iced tea and iced coffee taste best when fresh-brewed hot over ice.
Try it by placing a tall cup filled with ice on the Drip Tray Plate (the Drip Tray
Assembly can be removed to accommodate taller cups), choose your favorite
K-Cup pack, select the brew size and press the BREW Button. Also, look for
®
the Brew Over Ice icon on K-Cup packs specially crafted to brew over ice!
®
IMPORTANT: Do not brew into a cup made of glass. Doing so may cause the
glass to crack or break.

Brewing hot Water

Your brewer is able to produce hot water for making hot cocoa from a packet,
for use in cooking, for making soups, etc. Simply follow the instructions on
page 7 — "Ready To Brew Your First Cup" — without adding a K-Cup
NOTE: After brewing a hot cocoa K-Cup
cleansing brew without a K-Cup pack.
®
pack.
®
pack, we recommend running a
®

Purging the Brewer

If your brewer has not been used for more than one week, you should purge
the water from the internal tank.
If there is water in the Water Reservoir, remove the Lid, then lift the
1.
Water Reservoir straight up and away from brewer. Discard water, rinse
and refill with water. Place the Water Reservoir back on the brewer and
replace the Lid. (If there is no water in the Water Reservoir, simply refill.)
Be sure the brewer is turned on. Lift and lower the Handle on the brewer
2.
without inserting a K-Cup pack.
®
The LCD Control Center will indicate "READY TO BREW." Brew a Travel
3.
Mug (11.25 oz. serving) of water (do not use a K-Cup
Repeat steps 2 and 3 two more times to completely purge water from
4.
internal tank.
If you are experiencing any problems with your brewer, please contact
Customer Service at 1.866.901.BREW (2739).
9
pack).
®