Controls & Indicators; Setting The Clock; Programming On/Off Features - Keurig K-CUPK70 Owner's Manual

P10 201309003 KER755_K70-75.pdf 1C( K) ZB2319 2013.09.06
SECTION 2
Controls & Indicators (LCD Control Center)

Setting the clock

Setting the clock is optional. When the clock is set, the time will appear in the
LCD Control Center.
NOTE: You must set the clock if you will be using the Auto
On/Off Time programming feature.
Press the MENU Button.
1.
10
fig.
The word "OFF" will appear at the top of the
2.
LCD Control Center to indicate that the clock
is not set (fig. 10). The programming options
will appear on the LCD Control Center with a
small arrow pointing to "SET CLOCK."
"H" (Hour) will appear above the Left Button
and "M" (Minute) will appear above the Right
Button. The "H" and "M" icons and Left and
Right Buttons will flash.
Press or hold the Left Button under the
3.
flashing "H" until you have reached the
appropriate hour. If the hour has passed 12,
"PM" will be shown.
Press or hold the Right Button under the
4.
flashing "M" to set the minutes.
When you have reached the correct time, press the MENU Button six
5.
times to scroll through the remaining programming steps.
The correct time should now be displayed in the LCD Control Center.
6.
NOTE: If power is interrupted to the brewer by unplugging it, or if power is
lost, follow the procedure above to reset the time as the clock will not be
visible until the time is set. Brew size and brew temperature settings are
remembered and restored automatically. All other settings will be restored
automatically after clock is set.

Programming on/off Features

The brewer provides three modes so that you can enjoy gourmet coffee, tea
or hot cocoa on your own schedule. By programming your brewer to turn on
each morning, you will never have to wait for the brewer to warm up to brew
a gourmet cup of coffee. It will take the brewer approximately 4 minutes to
warm up from room temperature.
The brewer can be left on all the time so that it is
1. Leave it ON all the time.
always ready to brew a fresh cup of gourmet coffee, tea or hot cocoa. To
turn the brewer off at any time, simply press and release the Power
(NOTE : Although the clock remains on, if set, you can not brew a cup
Switch.
of coffee, tea or hot cocoa.) Press and release the Power Switch again to
restore power to the brewer. You will have to wait for the water to heat up
before the brewer is ready to brew.
2. Set the brewer to "AUTO OFF" following a specified period of time after the
last brew.
a. Press the MENU Button twice to program the Auto Off feature. The LCD
Control Center will display the programming options with a small arrow
next to "SET AUTO OFF" (fig. 11).
10