Setting Power Save Mode
Your product reduces power consumption when it is not in actual
use. The Power Save mode setting determines the length of time
the machine waits after a job is printed before it switches to a
reduced power state.
1
Press Setup on the operation panel. The display shows the
first menu; LANGUAGE.
2
Press the Scroll buttons (
SAVE MODE" in the display and then press Enter.
3
The display shows the time available. Press the Scroll buttons
(
or
) until you see the desired time in the display. The
current setting is tagged with a
4
Press Enter to save the selection.
or
) until you see "POWER
at the end of the display.
Setting Up Your Product
1.19