Setting Sounds; Speaker, Ringer, Key Sound, And Alarm Sound; (Only For Scx-4521F); Speaker Volume - Samsung SCX-4521F User Manual

Setting Sounds

(Only for SCX-4521F)

You can control the following sounds:
• Speaker: You can turn on or off the sounds from the
telephone line through the speaker, such as the dial tone or
a fax tone. With this option set to "Comm." the speaker is
on until the remote machine answers.
• Ringer: You can adjust the ringer volume.
• Key Sound: With this option set to "On" a key tone
sounds each time a key is pressed.
• Alarm Sound: You can turn the alarm sound on or off.
With this option set to "On" an alarm tone sounds when
an error occurs or fax communication ends.
• You can adjust the volume level using the On Hook Dial
button.

Speaker, Ringer, Key Sound, and Alarm Sound

1
Press Menu until "Sound/Volume" appears on the top line
of the display.
2
Press the scroll button ( or
options. Press Enter when you see the desired sound
option.
3
Press the scroll button ( or
status or volume for the option you have selected.
You will see the selection on the bottom line of the display.
For the ringer volume, you can select "Off", "Low", "Med",
and "High". Setting "Off" means that the ringer does not
sound. The machine works normally even if the ringer is
turned off.
4
Press Enter to save the selection. The next sound option
appears.
5
If necessary, repeat steps 2 through 4.
6
To return to Standby mode, press Stop/Clear.

Speaker Volume

1
Press On Hook Dial. A dial tone sounds from the speaker.
2
Press the scroll button ( or
you want. The display shows the current volume level.
3
Press On Hook Dial to save the change and return to
Standby mode.
N
: You can adjust the speaker volume only when the
OTE
telephone line is connected.
) to scroll through the
) to display the desired
) until you hear the volume
2.11
Getting Started

Using the Save Modes

Toner Save Mode

Toner Save mode allows your machine to use less toner on each
page. Activating this mode extends the life of the toner
cartridge beyond what one would experience in the normal
mode, but it reduces print quality.
To turn the toner save mode on or off, press Toner Save.
• If the button backlight is on, the mode is active and the
machine uses less toner when printing a document.
• If the button backlight is off, the mode is deactivated and
the machine prints with the normal quantity of toner.
N
: When PC-printing, you can also turn on or off the toner
OTE
save mode in the printer properties. For details, see Software
User's Guide.

Power Save Mode

Power Save mode allows your machine to reduce power
consumption when it is not in actual use. You can turn this
mode on and select a length of time for which the machine
waits after a job is printed before it switches to a reduced power
state.
1
Press Menu until "Machine Setup" appears on top line of
the display.
2
Press the scroll button ( or ) until "Power Save" appears
on the bottom line. Press Enter.
3
Press the scroll button ( or
bottom line and press Enter.
Selecting "Off" means that the power save mode is
deactivated.
4
Press the scroll button ( or
want appears.
The available options are 5, 10, 15, 30, and 45 (minutes).
5
Press Enter to save the selection.
6
To return to Standby mode, press Stop/Clear.
) to display "On" on the
) until the time setting you