Changing The Display Language; Using The Power Save Mode; Auto Continue - Samsung CLX-2160 User Manual

Changing the display language

To change the language that appears on the control panel, follow these
steps:
1 Press Menu until Copy Menu appears on the bottom line of the
display and press OK.
2 Press the Scroll buttons until System Setup appears and press OK.
3 Press the Scroll buttons until Machine Setup appears and press OK.
4 Press the Scroll buttons until Language appears and press OK.
5 Press the Scroll buttons until the language you want appears and
press OK.
6 Press Stop/Clear to return to Standby mode.

Using the power save mode

Power Save mode allows your machine to reduce power consumption when
it is not in actual use. You can turn this mode on and select a length of time
for which the machine waits after a job is printed before it switches to a
reduced power state.
1 Press Menu until Copy Menu appears on the bottom line of the
display and press OK.
2 Press the Scroll buttons until System Setup appears and press OK.
3 Press the Scroll buttons until Machine Setup appears and press OK.
4 Press the Scroll buttons until Power Save appears and press OK.
5 Press the Scroll buttons until the time setting you want appears and
press OK.
6 Press Stop/Clear to return to Standby mode.
This is the option to set the machine to continue printing or not, in case
the paper size you have set and the paper within the tray mismatches.
1 Press Menu until Copy Menu appears on the bottom line of the
display and press OK.
2 Press Scroll buttons until System Setup appears and press OK.
3 Press Scroll buttons until Machine Setup appears and press OK.
4 Press the Scroll buttons until Auto Continue appears and press OK.
5 Press the Scroll buttons until the binding option you want appears.
• On: Automatically prints after set time passes, when the paper size
mismatches the tray paper size.
• Off: Waits until you press Black Start or Color Start on the control
panel, when the paper size mismatches the tray paper size.
6 Press OK to save your selection.
7 Press Stop/Clear to return to Standby mode.
2.2
<System setup>

Auto continue