Setting Paper Size And Type; Paper Size - Samsung SCX-1100 User Manual

Setting Paper Size and Type

First make sure you have paper loaded, following the instructions
in "Loading Paper" on page 1.10. Then you have to set the paper
size and type using the operation panel buttons.
N
In PC printing mode, you have to select the paper type and size in the
application program you use.

Paper Size

After loading paper, take the following steps to set the paper size
from the operation panel:
1
2
3
4
5
N
output tray. If you do, a paper jam may occur.
3.2 Copying
: These settings are applied to the stand-alone copy mode only.
OTE
Press Setup on the operation panel. The display shows the
first menu: "LANGUAGE".
Press the Scroll buttons (
SIZE" in the display.
Press Enter . The current setting is tagged with a
of the display.
Press the Scroll buttons (
size you are using in the display.
Press Enter to save the selection.
: When you use legal-size paper, do not pull out the paper
OTE
or ) until you see "PAPER
or ) until you see the paper
at the end