Fitting The Chimney Stack - Electrolux EFC 635 Instruction Book

Fitting the Chimney Stack

The chimney consists of two sections. The upper
chimney measures 215mm and the lower chimney
(with the holes for recirculation on either side)
measures 530mm.
1. Fit the two plastic supports provided into
the two holes on top of the canopy as
illustrated in Fig. 7.
2. Fit the upper section (S) first. Expand the
chimney slightly to allow it to be fitted over
the brackets 2, and then secure the
chimney stack to brackets using the four
self tapping screws provided as illustrated
in Fig. 7.
3. Fit the lower chimney section (I) by
expanding the chimney slightly to allow it
to be fitted over the brackets 1, and the
upper chimney section and bracket 2 as
illustrated in Fig. 7.
4. Secure the bottom of the chimney to the
plastic supports using the self tapping
screws provided as illustrated in Fig. 7.
S
I
Fig.7
16