Electrolux EFC635 Instruction Manual
Electrolux cooker hood
Hide thumbs
Also See for EFC635:
- Instruction book (20 pages) ,
- User manual (10 pages) ,
- Instruction book (21 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Electrolux EFC635
Summary of Contents for Electrolux EFC635
- Page 1 EFC 635 EFC 935 Instructions Manual...
- Page 2 Instructions Manual INDEX RECOMMENDATIONS AND SUGGESTIONS ........................3 CHARACTERISTICS................................4 INSTALLATION ..................................6 USE......................................9...
-
Page 3: Recommendations And Suggestions
RECOMMENDATIONS AND SUGGESTIONS INSTALLATION • The manufacturer will not be held liable for any damages resulting from incorrect or improper installation. • The minimum safety distance between the cooker top and the extrac- tor hood is 650 mm. • Check that the mains voltage corresponds to that indicated on the rating plate fixed to the inside of the hood. -
Page 4: Characteristics
CHARACTERISTICS Dimensions... - Page 5 Components Ref. Q.ty Product Components Hood Body, complete with: Controls, Light, Blower, Filters Telescopic Chimney comprising: Upper Section Lower Section Reducer Flange ø 150-120 mm Air Outlet Connection Lower Chimney Fixing Bush Ref. Q.ty Installation Components Hood Body Fixing Brackets 7.2.1 Upper Chimney Section Fixing Brackets Wall Plugs...
-
Page 6: Installation
INSTALLATION Wall drilling and bracket fixing Wall marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. • Draw a horizontal line at 650 mm above the hob for installation without the back panel, or at height H (H = height of the visible part of the panel) for installation with the back panel. - Page 7 Mounting the hood body • Before hooking up the hood body, adjust the two screws Vr located on the hood body connection points so that they are at the half way point. • Hook the hood body to the mounted bracket. •...
- Page 8 ELECTRICAL CONNECTION • Connect the hood to the mains through a two-pole switch hav- ing a contact gap of at least 3 mm. • Remove the grease filters (see paragraph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan.
-
Page 9: Use
Light Switches the lighting system on and off Motor Switches the extractor motor on and off Speed Sets the operating speed of the extractor: 1. Low speed, used for a continuous and silent air change in the presence of light cooking vapour. 2. - Page 10 Grease filters CLEANING METAL SELF- SUPPORTING GREASE FILTERS • The filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage, and can be washed in a dishwasher. • Remove the filters one at a time by pushing them towards the back of the group and pulling down at the same time.
- Page 12 436003098_ver1...