INSTALLING THE COOKER HOOD
Fitting the Chimney Stack
�����
The chimney consists of two sections.
The lower chimney measures 740mm and the
���
upper chimney (with the recirculation grilles
on either side) measures 465mm. The overall
installed measurement is min. 870 - max
���
1200mm.
�
UPPER CHIMNEY
To fit the upper chimney section item 2.1 expand
���
the chimney slightly to allow it to be fitted over the
���
brackets item 7.2.1 as illustrated.
When installed in the recirculation mode ensure
that the recirculation ducting outlet extension
pieces item 14.1 align correctly with the outlet
���
grilles in the chimney.
Secure the sides of the chimney to the brackets
using the four screws item 12c (2.9x9.5mm)
provided, as illustrated.
LOWER CHIMNEY
To fit the lower chimney section item 2.2 expand
the chimney slightly to allow it to be fitted over the
upper chimney item 2.1 and the hood body item 1
as illustrated.
Secure the sides of the chimney to the hood
body using the two screws item 12c (2.9x9.5mm)
provided, as illustrated.
16