Intel EXPRESS 550T User Manual page 87

C H A P T E R 4
Adding a Member
Checking Member
connections
Advanced Configuration
To add a member to a user group:
1 Select IP Filtering Setup>Add member .
2 In Type , select whether the member is defined by Port (Proto-
col) or by Address.
3 For port selections, define the IP filter protocol, while for
Address define the IP Address (and subnet if necessary).
4 Select the User Group for this new member.
5 Click OK .
This checks which members a specific member can communicate
with, and lists them on screen. To check connections:
1 Select IP Filtering Setup .
77