Intel EXPRESS 550T User Manual page 70

C H A P T E R 3
Changing duplex mode
Changing the port speed
Changing the forwarding
mode on a port
60
Standard Configuration
5 Click OK .
To change the port's duplex mode (when auto-negotiation is dis-
abled):
1 Click the port you want to change.
2 Select Port Setup .
3 Click Port Mode .
4 Click Half Duplex or Full Duplex .
Half allows either transmission or receipt of the data and
Full allows both transmission and receipt of the data.
5 Click OK .
To change the speed a port accepts data (when auto-negotiation is dis-
abled):
1 Click the port you want to change.
2 Select Port Setup .
3 Click Port Mode .
4 Click Speed 10 or Speed 100 .
10 limits data entering to 10Mbps and 100 allows data speeds
up to 100Mbps.
5 Click OK .
To change the forwarding mode to be used on a port:
1 Click the port you want to change.
2 Select Port Setup .
3 Click Port Mode .
4 In Switch Forwarding Mode , click the forwarding mode
you want.
Default uses the same forwarding mode as specified in
Device Setup.
5 Click OK .