Intel EXPRESS 550T User Manual page 18

C H A P T E R 1
In an equipment rack
Ambient temperature
8
Intel Express 550T Routing Switch
Customer-supplied screws for securing the switch in the rack.
•
Mounting screws are not provided because the required sizes
may vary from rack to rack.
To mount the switch in a standard equipment rack:
1 Attach the mounting bracket marked "Left" to the left-hand side
of the switch, and attach the mounting bracket marked "Right"
to the right-hand side of the switch, using the four screws pro-
vided.
971126 Awaiting Drawing from EBZ
Make sure that you attach the mounting brackets to the correct
sides. Otherwise the switch will not align correctly in the
equipment rack.
2 If the four rubber feet prevent the switch from standing firmly
on the equipment rack's side support rails, remove them.
3 Set the switch in the equipment rack, and make sure there is
adequate space for air flow around the switch (see "Allow ade-
quate ventilation" in "Positioning and Installing the Switch", p.
7).
4 Screw the mounting brackets securely to the equipment rack.
If the switch is installed in a closed or multi-rack assembly, the oper-
ating ambient temperature of the rack environment may be greater
than the ambient temperature of the room. Make sure that the temper-
ature of the rack environment does not exceed the recommended op-
erating temperature for the switch.
Intel Express
550T Routing
Switch