Intel EXPRESS 550T User Manual page 86

C H A P T E R 4
Enabling IP Filtering
Adding a User Group
76
Advanced Configuration
IP Filtering is enabled by default. There are two default user groups,
which allow all traffic to pass. Enable is a toggle function, which also
allows you to disable IP Filtering:
1 Select IP Filtering Setup .
2 Select Enabled .
3 Set up any User Groups and Members required.
4 Click OK .
Before filtering can take place, you must define the different user
groups. To add a user group:
1 Select IP Filtering Setup>User Groups .
2 Click Add .
3 Type a unique name for the User Group.
4 Click OK .
5 When the User Group list is complete, click Close .