Intel EXPRESS 550T User Manual page 66

C H A P T E R 3
Changing the spanning
tree priority
Changing the message
age expiry time
Changing the hello expiry
time
56
Standard Configuration
The higher the value, the lower the chance of the switch being used
as the root bridge. To change the priority value:
1 Select Device Setup or Stack Setup .
2 Click Spanning Tree .
3 Click Priority .
4 Type the required value.
5 Click OK .
To change the maximum time between protocol information being re-
ceived and discarded:
1 Select Device Setup or Stack Setup .
2 Click Spanning Tree .
3 Click Message Age Timer Expiry .
4 Type the required number of seconds.
5 Click OK .
To change the time between transmissions of configuration BPDUs
from a switch that is, or attempting to become, the root:
1 Select Device Setup or Stack Setup .
2 Click Spanning Tree .
3 Click Hello Timer Expiry .
4 Type the required number of seconds.