Settings Dialog - Analog - RME Audio Fireface 800 User Manual

11.3 Settings Dialog – Gain
Inputs
Input selection for the channels 1, 7 and 8. Channel 1 can be the front instrument input, or the
rear TRS jack, or both simultaneously. Channel 7/8 can be the front microphone input, or the
rear TRS jack, or both simultaneously.
Level
Line In
Defines the reference level of the rear
analog inputs 5-8.
Line Out
Defines the reference level of the rear
analog outputs 1-6.
Phantom Power
Phantom power (48V) can be
selected for each microphone input
seperately.
Instrument Options
Drive activates 25 dB additional gain
for maximum sustain and brute
distortion.
Limiter activates a soft-limiter with a
threshold of –10 dBFS. Note: The
Limiter can only be switched off with
input selection Front.
Speaker Emulation removes low
frequency noise and cuts off higher
frequencies.
User's Guide Fireface 800 © RME
21