Table of Contents
Advertisement
4. Technical Specifications
• Power supply: external switching power supply, 100 - 240 V AC, 20 Watts
• Accepted power supply voltage: DC 8 V – 28 V, AC 8 V – 20 V
• Current at 12 V: 670 mA (8 Watts)
• Dimensions including rack ears (WxHxD): 265 x 44 x 165 mm (10.5" x 1.73" x 6.5")
• Dimensions without rack ears/handles (WxHxD): 218 x 44 x 155 mm (8.6" x 1.73" x 6.1")
• Weight: 1 kg ( 3.3 lbs)
• Temperature range: +5° up to +50° Celsius (41° F up to 122°F)
• Relative humidity: < 75%, non condensing
4.1 Analog Specs
AD
• Resolution AD: 24 bit
• Signal to Noise ratio: 110 dB RMS unweighted, 113 dBA
• Frequency response AD @ 44.1 kHz, -0.1 dB: 5 Hz - 21.5 kHz
• Frequency response AD @ 96 kHz, -0.5 dB: 5 Hz – 45.3 kHz
• Frequency response AD @ 192 kHz, -1 dB: 5 Hz - 74 kHz
• THD: < -110 dB, < 0.00032 %
• THD+N: < -104 dB, < 0.00063 %
• Crosstalk: > 110 dB
• Maximum input level AD: +19 dBu
• Input: XLR or 1/4" TRS, electronically balanced
• Input impedance: 10 kOhm
• Input sensitivity switchable: +4 dBu, -10 dBV, Lo Gain
• Input level for 0 dBFS @ Lo Gain: +19 dBu
• Input level for 0 dBFS @ +4 dBu: +13 dBu
• Input level for 0 dBFS @ -10 dBV: +2 dBV
DA
• Resolution DA: 24 Bit
• Signal to Noise ratio (SNR): 116 dB RMS unweighted, 119 dBA @ 44.1 kHz (unmuted)
• Frequency response @ 44.1 kHz, -0.1 dB: 1 Hz – 21.1 kHz
• Frequency response @ 96 kHz, -0.5 dB: 1 Hz – 43.5 kHz
• Frequency response @ 192 kHz, -1 dB: 1 Hz – 70 kHz
• THD: -103 dB, < 0.0007 %
• THD+N: -100 dB, < 0.0001 %
• Crosstalk: > 110 dB
• Maximum output level DA: +19 dBu
• Output: XLR and 1/4" TRS, servo balanced
• Output impedance: 75 Ohm
• Output level switchable: Hi Gain, +4 dBu, -10 dBV
• Output level at 0 dBFS @ Hi Gain: +19 dBu
• Output level at 0 dBFS @ +4 dBu: +13 dBu
• Output level at 0 dBFS @ -10 dBV: +2 dBV
DA - Stereo Monitor Output (Phones)
• as DA, except:
• Output: 6.3 mm stereo TRS, unbalanced
• Output impedance: 30 Ohm
User's Guide ADI-2 © RME
4
Advertisement
Table of Contents
