Conversion To Lp (Propane) Gas - Napoleon GSS48 Manual

Hide thumbs Also See for GSS48:
Table of Contents

Advertisement

Available languages

Available languages

16

Conversion to LP (Propane) Gas

WARNING!
EN
is cool. Ensure the burner is turned off. Turn the gas off at source and disconnect the appliance before
beginning conversion.
WARNING!
WARNING!
be leak tested before operating the appliance.
Your fireplace can be easily converted to LP (Propane) Gas by following these steps:
1. Remove the glass embers from the tray.
2. Remove the glass tray from the fireplace by removing the (8) screws that hold the tray in place.
3. Carefully lift the glass tray from the fireplace and set aside. Take care not to damage or kink the
thermocouple wire.
4. Disconnect the stainless steel flex connector from the orifice using (2) wrenches.
5. Unscrew the natural gas orifice from the inside of the burner as illustrated.
6. Replace the natural gas orifice with the LP (Propane) orifice supplied.
Note: The air shutter has been factory set and does not need to be adjusted.
www.napoleongrills.com
To avoid the possibility of burns conversions should only be done when the appliance
Glass embers may have sharp edges wear safety glasses and gloves when handling.
This conversion must be performed by a licensed gas fitter, and all connections must

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gss48st

Table of Contents