Conversion To Natural Gas - Napoleon GPFL48 Manual

Linear patioflame
Hide thumbs Also See for GPFL48:
Table of Contents

Advertisement

12

Conversion to Natural Gas

WARNING!
EN
with the manufacturer's instructions and all applicable codes and requirements of the Authority
Having Jurisdiction. If the information in these instructions is not followed exactly, a fire, explosion or
production of carbon monoxide may result causing property damage, personal injury or loss of life.
The qualified service agency is responsible for the proper installation of this kit. The installation is
not proper and complete until the operation of the converted appliance is checked as specified in the
manufacturer's instructions supplied with the kit.
WARNING!
flame is cool. Ensure burner is turned off. Turn gas off at source and disconnect the patio flame before
beginning conversion.
WARNING!
WARNING!
be leak tested before operating the patio flame.
Your patio flame can be easily converted to natural gas by following these steps:
1. Remove the glass embers from the tray.
2. Remove the glass tray from the patio flame by removing the (18) screws that hold the tray in place.
3. Carefully lift the glass tray from the patio flame and set aside. Take care not to damage or kink the
thermocouple wire.
5. Disconnect the stainless steel flex connector from the orifice using (2) wrenches.
www.napoleongrills.com
This conversion kit shall be installed by a qualified service agency in accordance
To avoid the possibility of burns conversions should only be done when the patio
Glass embers may have sharp edges wear safety glasses and gloves when handling.
This conversion must be performed by a licensed gas fitter, and all connections must
4.
N415-0293 OCT 09.17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gpfl48m

Table of Contents