Napoleon GSS48 Manual page 12

12
Trim Installation (Optional)
NOTE!
EN
prior to using the appliance.
The trim is designed to work with facing material that protrude between 1 1/2" (38mm) to 4" (102mm)
from the front of the appliance.
SIDE VIEW
Trim Assembly
Serrated
Side Up
FRONT VIEW
WARNING!
cement board and finnishing materials on both sides to allow access to slots for frame.
www.napoleongrills.com
Most stainless steel parts are supplied with a protective plastic coating that must be removed
GSS48
Finishing Material
1 1/2" (38mm) Minimum
4" (102mm) Maximum
Front of Unit
Trim Assembly
When installing the optional trim kit the installer must leave 5/8" (16mm) gap in
GSS48ST
Finishing Material
1 1/2" (38mm) Minimum
4" (102mm) Maximum
Front of Unit
Serrated
Serrated
Side Up
Side Up
Trim Assembly