Clearing The Cmos; Figure 9. Clear Password Jumper - Intel Server Board S5000PAL User Manual

2
3
J1D2
4. Wait five seconds.
5. Return the Password Clear jumper to the Password Clear Protect position, covering
pins 1 and 2.
6. Close the server chassis.
7. Reconnect the AC power and power up the server.
8. The password is now cleared and can be reset by going into BIOS setup.

Clearing the CMOS

If you are not able to access the BIOS setup screens, the CMOS Clear jumper will need to
be used to reset the configuration RAM.
1. Power down the system and disconnect the AC power.
2. Open the server.
3. Move the jumper from the normal operation position, CMOS Clear by BMC, at
pins 1 and 2 to the CMOS Clear Force Erase position, covering pins 2 and 3.
®
Intel Server Board S5000PAL User's Guide
BMC Force
Update Mode
Disable
2
Password
Enable
Reset
3
J1D1
2
Clear
CMOS
3
J1D3

Figure 9. Clear Password Jumper

TP02080
19