Care And Cleaning; What To Do If - John Lewis JLBIIH804 Instruction Manual

Ceramic glass induction hob
Hide thumbs Also See for JLBIIH804:
Table of Contents

Advertisement

Care and cleaning

Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance.
For your safety, do not clean the
appliance with steam blasters or high-
pressure cleaners.
Scratches or dark stains on the glass
ceramic have no effect on how the
appliance operates.
To remove the dirt:
1. – Remove immediately: melted
plastic, plastic foil, and food with sugar.
If not, the dirt can cause damage to the

What to do if...

Problem
You cannot start the appliance or
operate it.
The cooking zone reduces the
heat setting to
A sound operates when the
appliance is off.
2. Clean the appliance with a moist cloth and
3. At the end rub the appliance dry with
Possible cause and remedy
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• There is water or fat stains on the control panel. Clean the
control panel.
• The child safety device or key lock operates. See the chapter
Operating the appliance.
• Start the appliance again and set the heat setting in 10 seconds.
You covered one or more sensor fields or there is water or fat
stains on the control panel. Uncover the sensor fields. Clean the
control panel.
You covered one or more sensor fields. Uncover the sensor fields.
14
appliance. Use a special scraper for the
glass . Put the scraper on the glass
surface at an acute angle and move the
blade on the surface .
– Remove after the appliance is
sufficiently cool: limescale rings ,
water rings, fat stains, shiny metallic
discolorations. Use a special cleaning
agent for glass ceramic or stainless
steel.
some detergent.
a clean cloth.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents