Auto Detect Hard Disk; Change User Password - Intel Motherboard Raptor AT Installation Manual

Raptor AT – Installation Guide
The current voltage is shown (only available with the optional
hardware monitor).
CPU Fan
Secondary Fan
The current fan speed is shown (only available with the optional
hardware monitor).
Onboard IDE
This option specifies the IDE channel used by the onboard IDE
controller. The settings are Disabled, Primary, Secondary and
Both (default).

Auto Detect Hard Disk

Choose this option to let AMIBIOS find the IDE hard disk drive
parameters for all IDE drives connected to the primary and
secondary IDE channels installed in the system. AMIBIOS
automatically configures the drive parameters after it has
detected these parameters.

Change User Password

Select the Change User Password from the Security section of
the AMIBIOS Setup main menu. Enter the password and press
<Enter>. The screen does not display the characters entered.
After the new password is entered, retype the new password as
prompted and press <Enter>. This option will be available only
if Supervisor Passwords exists.
34