Appendix C Disk-On-Chip - Intel Motherboard Raptor AT Installation Manual

Appendix C
The Raptor AT offers two on-board flash disks as optional devices. The
Disk-On-Chip is a single chip flash disk device in a standard 32-pin
DIP socket.
It features up to 288MB (each) of storage capacity with high-speed
boot-up capabilities, including the Flash File System (FFS) for easy
storage.
This feature of the Raptor AT is a perfect replacement for conventional
hard-drives in the harsh industrial environment where shock and
vibration is a burden for standard hard drives.
Jumper JP7 selects the memory addresses to be used for the Disk-On-
Chip. Possible addresses are listed below.
Table C-1 Disk-on-Chip Selection
Addresses
D000h/D400h* Closed
D400h/D800h
D800h/DC00h
DC00h/D000h
* Manufacturer's Settings.
For upgrade and technical specifications about Disk-on-Chip, please
contact the manufacturer M-Systems at www.m-sys.com.
Appendix C: Disk-On-Chip
JP7 JP7
1-2 3-4
Open
Open Closed
Open Open
Open Open
Disk-On-Chip
JP7
5-6
Open
Open
Closed
Open
JP7
7-8
Open
Open
Open
Closed
53