Detachable Front Panel - Sanyo FXCD-1100 Operating Instructions Manual

DETACHABLE FRONT PANEL

The front panel is designed to be removable for antitheft purposes.
It is recommended that you remove and carry the front panel with you when you leave your car.
A carrying case is provided with the unit for this purpose.
HOW TO DETACH THE FRONT PANEL
1 Press down the release knob (REL) to release the front
panel.
2 Pull the entire panel to remove it from the unit.
HOW TO REPLACE THE FRONT PANEL
Align the right side of the panel with the stopper,
and then push the left side of the panel into the
unit until it clicks.
Note
The unit will not operate if it is installed incorrectly.
CAUTION
With the door opened, do not attempt
to remove or replace the front panel.
SECURITY
To avoid theft or loss of the front panel, you can inacti
vate the release knob by installing the screw provided
as shown.
CAUTION
S Do not attempt to remove the panel in a manner other than that described above.
S When installing the panel, do not force it into the unit.
S Do not touch the connection terminals of the panel or the unit. It may cause poor contact.
S Use a clean, dry cloth when cleaning the terminals.
S Keep the panel out of direct sunlight and high temperatures.
S Prevent the panel from coming into contact with benzene, thinner, or insecticides.
S Do not drop the panel.
RELEASE KNOB
FRONT PANEL
FRONT PANEL
-6-
FRONT PANEL
SCREW