Sanyo FXCD-1100 Operating Instructions Manual page 14

Fold down design full panel detachable fm stereo/am receiver auto reverse cassette player compact disc player with cd changer controller iso mounting with removable trim ring
Hide thumbs Also See for FXCD-1100:
Table of Contents

Advertisement

Available languages

Available languages

LOCATING THE BEGINNING OF A PROGRAM (AMSS)
This system is equipped with a function that allows you to skip forward or backward to locate the beginning of
a particular selection on the tape. (Automatic Music Select System : AMSS)
1 Press the AMSS button ➆. 
2 Press button ➄ to skip forward up to 9 selections from the current location on the tape.
e.g.) With 
" displayed, press button ➄ three times. 
The system will search for 3 blank spaces between selections in the forward direction, then begin
playing the third selection from the starting point.
3 Press button ➅ to skip backward to the beginning of the current selection, or up to 8 selections from the current
location on the tape.
e.g.) With 
" displayed, press button ➅ five times. 
The system will search for 5 blank spaces between selections in the backward direction, then begin
playingthe forth selection from the starting point. (The blank space before the current selection counts
as one blank space.)
4 To cancel AMSS mode, press button ➆ again.
Notes
S If AMSS detects 15 seconds of blank space, it will automatically advance the tape to
the next selection.
S AMSS may not operate properly if
S A tape was recorded at low level.
S A tape has long, silent intervals.
S A tape is a live recording.
DOLBY B NOISE REDUCTION BUTTON
To play back a tape encoded with Dolby* NR, press button ➇. When Dolby* NR is activated, the indicator lights.
To play other tapes not encoded with Dolby* NR, press the button to switch Dolby* NR off. The indicator goes
out.
*Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
Dolby" and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
METAL PLAY MODE
If a metal or high-position tape is used, press metal button ➈ to make the player in metal play mode. MTL is
indicated.
REPEAT MODE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This operation makes it possible to listen repeatedly to a selection.
Press RPT ➉ during play. The selection playing will continue until RPT is pressed again.
" is displayed.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- 12 -
. . . .
" is displayed.
" is displayed.
. . . . . . . . . . . . . . . . . .
5, 6, 7
8
9
10

Advertisement

Chapters

Table of Contents
loading

Table of Contents